1 / 6
-18%
Save $2.64
Vasidolls

Tiger Totem Engine Hood Scratch Decoration Car Stickers

$11.99 - $31.99 82 % OFF $14.63
0 sold
Color
Size
Qty

When you get the sticker, please first understand its structure, which is composed of three layers (of course, packaging is not included), transfer film, sticker, PVC bottom layer. Uncovering the transfer film, the sticker shall be stuck on the transfer film, and there is adhesive film on the back of the sticker.
 

Paste method of small car stickers with transparent transfer film (dry paste method):
 

Tools: rags, scraper or credit card

1. Clean the body and keep it dry.

2. Determine the position to be pasted. In general, slowly paste, scrape with tools and uncover the bottom paper at the same time.

3. If the figure is not large, the transparent transfer film and the sticker can be torn off and pasted again. However, care must be taken not to cause accidental adhesion.

4. After pasting, repeatedly scrape and press for several times. Remove the transparent transfer membrane.

5. Cut a knife with an art knife at the door and the seam of the car and stick it inside.

6. Do not let the car stickers and the body have any separation or protrusion.
 

Sticking method of large car stickers with transparent transfer film (wet sticking method):
 

Tools: rags, sprinklers, scrapers or credit cards

1. Clean the car body and spray water evenly on the parts to be pasted to reduce the viscosity of the sticker and facilitate the adjustment of the position.

2. Determine the position to be pasted. Slowly paste, gently scrape with tools and uncover the bottom paper at the same time.

3. In case of door handle or anti chafing strip, the material shall be cut and wrapped according to the situation.

4. Adjust it properly. After confirming the general position of the figure, wipe off the water and bubbles repeatedly. Remove the transparent transfer membrane.

5. Cut a knife with an art knife at the door and the seam of the car and stick it inside.

6. Do not let the car stickers and the body have any separation or protrusion.

7. Try to let the moisture in the car stickers dry out. If possible, it can be moderately heated and dried. According to the weather, wash the car in a day or two.
 

*@* *@*1006965